85 degree Mechanical Main Retracts 3/16" Wire (pair).
Constructed from a durable filled nylon chassis, supporting a large aluminum pivot bearing, these mechanical retracts are tops in dependable operation. Supplied with 3/16” dia. strut wires, each unit has a positive up and down locks and are designed for aircraft weighing from 5 to 10 pounds. These gear are also designed to operate with standard or retract servos.
- Servos Not Included
- Total Length: 286 mm closed, 283 mm open
- Width of base: 44.45 x 44.45 mm
- On same side of retract, holes are 31.75 mm center to center
- Opposite side holes center to center: 34.29 mm
- Distance from edge of base to loop in closed position: 8 mm
- Distance from edge of base to loop in open position: 16 mm
- Diameter of loop: 17 mm
- Length of wire from loop: 216 mm
- Total height of base: 27.94 mm
- Thickness of mount lip: 2.54 mm
- Length of mount lip: 44.45 mm
- Width of base: 24.13 mm
- Height from bottom of base to center of control rod: 21 mm