- Information
- Correct factory-specified connectors
- Waterproof switch
- Factory-specified wire gauge
- Place slight outward pressure, with thumb, on the small tab located on outside edge of ESC case.
- Grip the harness close to the connector at the ESC and pull gently, straight up from ESC, to remove the harness from the ESC pin header.
- Note: Do not yank or forcefully pull harness out of ESC. May cause damage to ESC or harness.
- Place slight outward pressure, with thumb, on the small tab located on outside edge of ESC case.
- Following the wiring diagram provided on the side of the ESC's case, place the 5 wire connector onto the ESC pin header.
- Note: Misalignment of the harness will prevent the ESC from operating. Be sure that the brown receiver wire is plugged in next to the positive (+) red battery wire.
- Gently press on the connector to fully engage with the ESC pin header.
- Reconnect the ESC to the receiver.
Castle RECEIVER HARNESS REPLACEMENT, COPPERHEAD 10
Replacement Receiver Harness for the Copperhead 10 ESC.
Features:
To Remove the Receiver Harness:
To Replace the Receiver Harness:- Egenskaper
-
- Delar
-
- Populära Tillbehör
- Nedladdningar
-
- Flik
-
Passar Till
Artnr:
Lagersaldo:
3 st
Cirkapris:
3650 kr
Artnr:
Lagersaldo:
3 st
Cirkapris:
3306 kr
Artnr:
Lagersaldo:
10 st
Cirkapris:
3306 kr
Artnr:
Lagersaldo:
4 st
Cirkapris:
3306 kr
Artnr:
Lagersaldo:
6 st
Cirkapris:
3306 kr
Artnr:
Lagersaldo:
1 st
Cirkapris:
3306 kr
Artnr:
Lagersaldo:
2 st
Cirkapris:
3306 kr
Artnr:
Lagersaldo:
6 st
Cirkapris:
3306 kr
Artnr:
Lagersaldo:
2 st
Cirkapris:
3306 kr
Artnr:
Lagersaldo:
3 st
Cirkapris:
3492 kr
Artnr:
Lagersaldo:
2 st
Cirkapris:
3412 kr
Artnr:
Lagersaldo:
2 st
Cirkapris:
3571 kr
Artnr:
Lagersaldo:
3 st
Cirkapris:
3571 kr
Artnr:
Lagersaldo:
0 st
Cirkapris:
3663 kr
Artnr:
Lagersaldo:
4 st
Cirkapris:
3650 kr
Artnr:
Lagersaldo:
22 st
Cirkapris:
3571 kr
Artnr:
Lagersaldo:
4 st
Cirkapris:
3650 kr