Segelbåt Dragon Flite 95 V3 RTR

Joysway JW8811V3RTR - Dragon Flite 95 Version 3 Sailboat RTR

• Servo tray screws replaced with flat head screw
• Modified transparent hatch - to match with flat head screws
• Modified servo tray; larger mounting hole, secure the mounted plate with screws from top of servo tray
• New switch mounting plate - now sailors can replace the power switch from top of servo tray, without the need to disassemble the servo tray to replace the switch
• Modified dimensions of the Black hatch cover patch
• New molded reinforced rudder servo arm
• Improved rudder metal arm, the hole which fit with clevis change from 2mm diameter to 1.9mm diameter, this change will make sure rudder well fitness, minimize the left and right clearance.
• Two bearing change to 404 stainless steel materials
• Modified mast stub - slightly bigger diameter to improve the fitness
• Mainsheet Bridle Plate modification - reinforced , thicker & stronger
• Mast deck sliding plate, modify mold：Width from 18.9 to 19.4mm, stop mast deck plate sideways wobble by tighter fit with keelbox top molding. 
• Screws, nuts & washers for the mast deck plate, screws for keel, all change to 316 stainless steel
• Jib boom rear plug, change the design, cord can be thread through outside, easy for change the jib boom lifting cord
• Mainsail luff ring, increase the bend on the end to form more of a hook shape
• Better quality forestay steel wire, Shorten the forestay wire length, use thinner copper clamp to clamping the top and bottom wire, prevent wire loop loose.   
• All sails corners, change from one layer patch per side to two layers patches to reinforce
• We've change to better quality elasticated sheeting cord 
• Included is the new 2025 winch servo for more accurate sails control
• Flysky i6 radio

• Length: 950 mm
• Width: 125 mm
• Rig Height: 1050 mm
• Overall Height: 1470 mm
• RTR Total weight: 2000g (Batteries not included)
• Sail Area (Mainsail): 2314 cm2
• Sail Area (Jib): 1422 cm2
• Sail Area (Overall): 3736 cm2
• Hull Material: Molded plastic with painted finish and logo sticker

• Flysky i6 radio & receiver
• Fully Painted, Moulded Plastic Hull
• 50 micron mylar film racing sails with painted flow stripes and logo
• Moulded carbon fibre keel with zinc ballast bulb
• Metal geared rudder servo and fast, powerful sail winch
• Display stand (Moulded plastic and fibreglass tubes)

• 4pcs of AA Alkaline batteries for Transmitter (Not included)
• 4pcs of AA Alkaline batteries for Receiver (Not included)